Presentation on the Intersolar Europe Munich from 19 to 21 June 2013 in Hall B3/booth 210 Rangsdorf 5 June 2013 – mounting system, international developer and manufacturer of solar mounting systems, presented at the international exhibition Intersolar Europe in Munich new outdoor frame Sigma I be XL. It combines the advantages of outdoor systems in the existing product portfolio of mounting system. Firstly, the new frame is easy to use and suitable both for the longitudinal and the transverse mounting. Secondly, the Installer saves a lot of time and therefore money by the high degree of pre-Assembly. Moreover with the Sigma I XL only an additional time savings during installation and advantages for the subsequent maintenance of the solar farms means a battering post from that. Thirdly, the use of the reusable frame protects the environment, because through the ramming posts is no concrete foundation and consequently no sealing required. In addition, the system is particularly easy dismantling and recycling.
Helge Tost, sales manager at mounting systems says: The outdoor frame Sigma I XL is characterised by its simple, functional design and the reduced use of the tools. Most of the components are virtually mounted and allow a faster installation outdoors. Especially for large projects this means potential savings.” The new product Sigma I XL combines the advantages of the single pfost-field frame Sigma I with the proven rail technology from the Sigma II. Sigma I XL offers flexibility in designing installers here, because you can install vertically as well as across the new frame. Both versions are based on the PI-rail technique and a fastening process patented for the respective mounting direction.
When the transverse mounting of the Sigma I XL is a click system used, to attach the Rails to the modules. So, the installer can install the system without screws and thus quickly and easily. For the upright variant, he used the t-nut mounting system patented technology, the Quickstone for a quick and safe installation.