Sandbox for the children with their hands The whole procedure consists of 8 stages. Consider them: Step 1. Determine the size of a thumbnail with a future sandbox. We do 1400h1400 mm. Height of 1800mm is better to make that adults could play freely with child. Roof itself must be made broader, so did not get rain.

We do 1800h1800 mm. Height 600mm (1 / 3 of the width). The roof will strengthen the column at 4 in the corners. This design is the most stable and prochnaya.Etap 2. Material select material Softwood natural drying of living twigs. We will need: – closely 150h25h6000 mm – 6 pcs. – Board 150h50h6000 mm – 3 pc.

– Timber 100h100h2000 mm – 4 pcs. – Waterproof plywood 1500h1500h20 mm – 1 page – tapping on a tree 4h55mm – 200 pcs. and 5h90 – 50 sht.Etap 3. Tools For production at home, we need: hacksaw, electrofret, planes, screwdriver or screwdriver, hand cutter, tape measure, carpenter's square, pencil. Step 4: Base. Photo 1. Step 4: Base. Photo 1.Etap 4. Base We make billet base. Cut off 4 boards 50mm, length 1500mm (with a margin too much then you can ottortsevat). Prostrogaem on all sides by plane. Tortsuem in 1400 and cut the size of the angle 45 degrees on the ends. Choose the lower edge of a quarter of the thickness of the plywood. Twists a box base with screws 5h90. Cut the plywood to size and fasten with screws to the bottom of 4h55.